Responding To Text Messages; Figure 7-7 Msf Broadcast Tab; Table 7-4 Msf Broadcast Types - Polycom KIRK 8000 Configuration Manual

MSF Messages (Message Service Function)

Responding to Text Messages

Polycom, Inc.
Figure 7-7 MSF Broadcast Tab
From the BroadcastType list, select the type of broadcast from the
2
broadcast list. You have the following options.
Type
All PP
Single PP
Group
In the Repetitions field specify how many times you want the message to
3
repeat.
If you have specified Single PP, then in the PP receiver ID type the direct
4
number of the PP you want to broadcast to.
- or -
If you have specified Group, then in the PP receiver ID type the group
5
number you want to send the message to.
The PP Receiver ID is disabled if you select all PP.
In the Discriminator field, specify how the handset message alert.
6
In the Text field, type the text you want to broadcast, and then click
7
Broadcast Request.
On the MSF Demo tab, the Connection Status area shows if a text message has
been sent from a handset to the KWS8000.
To respond to the message and set up a connection, type the handset
1
number in the Direct Number field. The number is displayed in the
Connection Status area. Click Connection Response.
To release the connection to the handset, type the direct number in the
2
Direct Number field, and then click Release Request.
Table 7-4 MSF Broadcast Types
Description
Sends message to all registered PPs.
Sends message to one specific PP.
Sends message to a group of handsets
System Management
43