Updating Kirk Wireless Server 300 Firmware; Figure 7-12 Adm. Page Kws300: Firmware/Ws Page; Figure 7-13 Adm. Page: Firmware Update Progress Bar - Polycom KIRK 300 Installation And Configuration Manual

Do not power off while updating.
Warning

Updating KIRK Wireless Server 300 Firmware

1 Click Firmware, and then click Wireless Server.
Figure 7-12
2 Click Browse.
Select the file in question, and then click Open.
3
Click Update, and the firmware is being updated.
4
Figure 7-13
Wait until the system has finished updating.
Figure 7-14
5 Optionally, you can block new calls during a firmware update by clicking
Administration, and then Wireless Server.
Adm. Page KWS300: Firmware/WS page
Adm. Page: Firmware Update Progress Bar
Adm. Page: Firmware update completed
System Management
7–8