Table of Contents
Advertisement
Using the Oscilloscope
To access the horizontal setup
To access the horizontal setup
• Click the horizontal setup button at the bottom of the waveform display.
or
• Select Horizontal from the Setup menu.
See figure 3-33.
Using the Horizontal Setup menu, you can set scale, position, and the horizontal
reference. You can also set up the delayed time base window, which uses
software expansion to present a magnified view of an area of the waveform. See
the built-in information system (described in chapter 4) for details.
Figure 3-33
Click this
button...
...or select this
menu item...
Accessing the Horizontal Setup
3-48
...to access the horizontal
setup dialog box.
Advertisement
Table of Contents
