To Adjust The Vertical Offset - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

To adjust the vertical offset

• Click and hold the left mouse button or touch screen stylus on the
waveform you want to move, then drag the pointer up or down to move
the waveform to the desired offset. Release when finished.
or
• Click and hold the left mouse button or touch screen stylus on the
ground reference indicator for the waveform you want to move, then
drag the pointer to move the waveform to the desired offset. Release
when finished.
or
• Click the channel button in the vertical toolbar, then set the vertical
offset using the spin box control in the Channel Setup dialog box.
If you leave the mouse pointer on the waveform (without clicking), the pointer
changes into crossed arrows as a visual indicator that you can drag the waveform
when you click and hold. If you move the crossed arrow pointer up or down,
the interface constrains the movement vertically and adjusts vertical offset only.
If you initially move the crossed arrow pointer left or right, the interface
constrains the movement horizontally and changes the horizontal position
setting only.
You can also adjust the vertical offset through the Channel Setup dialog box.
See "To access the channel setup" on page 3-44.
Using the Oscilloscope
To adjust the vertical offset
3-41