Table Of Contents - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

Contents
1 Setting Up the Oscilloscope
To inspect package contents 1-3
To inspect options and accessories 1-6
To position for proper airflow 1-10
To connect power 1-12
To connect the mouse, the keyboard, a LAN cable, a USB device, a printer,
and a GPIB cable 1-14
To connect oscilloscope probes 1-16
To connect SMA Cables 1-19
To tilt the oscilloscope upward for easier viewing 1-20
To turn on the oscilloscope 1-21
To turn off the oscilloscope 1-22
To verify basic operation for the 90000A series oscilloscope 1-23
Installing application programs on Infiniium 1-25
Changing Windows System Settings 1-26
To clean the oscilloscope 1-27
2 Working in Comfort
About Repetitive Strain Injury 2-3
Mice and Other Input Devices 2-4
3 Using the Oscilloscope
Front Panel 3-4
Acquisition Controls 3-6
Display Controls 3-6
Horizontal Controls 3-6
Trigger Controls 3-6
Vertical Controls 3-7
Marker and Measurement Controls 3-7
To set the oscilloscope to a known starting condition 3-8
To start and stop waveform acquisition 3-9
To clear the waveform display 3-10
To turn an analog channel on or off 3-11
To adjust analog channel's vertical scale and offset 3-12
To adjust horizontal scale and horizontal position 3-13
To magnify a part of the waveform using Zoom 3-14
To set the oscilloscope to trigger on an edge 3-15
To use the markers 3-16
To use the quick measurements 3-17
To enable or disable the touch screen 3-18
To reinitialize the oscilloscope 3-19
Graphical User Interface 3-21
To perform basic user interface operations 3-28
To select a command from the menu bar 3-32
To select a command from a context-sensitive menu 3-33
To start and stop waveform acquisition 3-36
Contents-1