To Access The Trigger Setup - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

To access the trigger setup

• Click the trigger setup button at the bottom of the waveform display.
or
• Select Trigger from the Setup menu.
The trigger setup dialog allows you to select any of the different modes of
triggering supported by the oscilloscope—Edge, Glitch, or Advanced, with
choices under Advanced of Pattern, State, Delay by Time, Delay by Events, or
Violation. You can set the parameters and conditions for each of those trigger
modes.
Figure 3-37
...or select this menu
item...
Accessing the Trigger Setup
To access the trigger setup
Click this button...
...to access the trigger setup dialog.
Using the Oscilloscope
3-55