Using the Oscilloscope
To adjust horizontal scale
To adjust horizontal scale
• To stretch the waveform horizontally, click the larger waveform button
next to the horizontal scale setting at the bottom of the waveform
display. To shrink the waveform horizontally, click the smaller
waveform button.
See figure 3-31. The oscilloscope decreases or increases the number of seconds
per division based on your selection.
You can also adjust the horizontal scale by clicking on the current setting. This
displays a pop-up numeric keypad that allows you to set an exact value for the
horizontal scale. Or, you can adjust the horizontal scale through the Horizontal
Setup dialog box. See "To access the horizontal setup" on page 3-48.
Figure 3-31
Click here to
display the
horizontal
setup dialog
box
Adjusting Horizontal Scale
3-46
Click here to set
the horizontal
scale directly
through a pop-
up numeric
keypad
Click to stretch
the waveform
Click to
(fewer seconds
shrink the
per division)
waveform
(more
seconds per
division)