To Clear The Waveform Display - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

Using the Oscilloscope

To clear the waveform display

To clear the waveform display
• Press the Clear Display key.
The oscilloscope clears the waveform display. If the oscilloscope is in Run mode
and is receiving triggers, it will update the display as it collects new waveform
data. Clearing the waveform display also resets averaging, infinite persistence,
color grade persistence, histogram, mask testing, and measurement statistics.
Figure 3-3
Clear Display Key
3-10
Erases the current
waveform display