Table of Contents
Advertisement
Setting Up the Oscilloscope
To connect oscilloscope probes
To connect oscilloscope probes
There are optional Infiniium oscilloscope probes, such as the 1130 and 1160
series probes, that connect to the oscilloscope differently than other
oscilloscope probes. Use the following steps to connect these snap-on probes
to the oscilloscope.
1 Attach the probe connector to the desired oscilloscope channel or
trigger input. Push it straight on until it latches into place.
Figure 1-5
Attaching the Probe Connector
1-16
Advertisement
Table of Contents
