Using the Oscilloscope
To magnify a part of the waveform using Zoom
To magnify a part of the waveform using Zoom
• To turn on zoom, press the Zoom key. To turn it off, press the Zoom
key again.
The waveform display area splits into two regions. The top one is the main
window. The bottom is the zoom window, which represents a software
expansion of the acquired waveform data. A section of the waveform in the
main window is highlighted to indicate the part shown in the zoom window.
The horizontal scale and horizontal position controls now change how the
waveform is shown in the zoom window. The horizontal scale will change the
amount of magnification, while the position will change the part of the waveform
in the main window that is shown in the zoom window.
Figure 3-7
Magnifying Part of the Waveform with Delayed Sweep
3-14
Press this key to magnify
a part of the waveform in
a zoom window on the
display