To Connect Sma Cables - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

To connect SMA Cables

You can connect an SMA cable to the 90000A series Infiniium oscilloscopes
except for the DSO90254A model by using the 54855-67604 SMA to precision
BNC adaptor.
1 Attach the two SMA to precision BNC adaptors to the ends of an SMA
cable.
2 Push the SMA to precision BNC adaptors onto the oscilloscope BNC
connectors.
3 Tighten the thumbscrews until they are snug.
Figure 1-8
Thumb screw
SMA cable
Connecting SMA to Precision BNC Adaptors
SMA to precision
BNC adaptor
Setting Up the Oscilloscope
To connect SMA Cables
1-19