Table of Contents
Advertisement
Operating Tasks
Receiver Setup
Receiver Setup
The analyzer/receiver function of the E6680A relates to measurement of
signals received from the DUT.
Clicking on the measurement tab at the upper left corner of the display opens
the Mode/Measurement/View Selector, which you can use to select a
particular kind of measurement. In this example, WLAN has been selected
under Mode, and the selections under Measurement are the measurements
available in that mode. (For some measurements, there are also selections to
be made under View.) In the example illustrated below, the Channel Power
measurement is selected. Click OK to run this mode/measurement selection.
Figure 5-3
Selecting Mode/Measurement
Getting Started Guide
59
Advertisement
Table of Contents
