To Connect Power - Keysight Technologies Infiniium 90000A Series User's Quick Start Manual

Setting Up the Oscilloscope

To connect power

To connect power
1 Position the oscilloscope so that it is not difficult to unplug the power
cord.
2 Connect the power cord to the rear of the oscilloscope, then to a
suitable ac voltage source 100 to 240 VAC ±10%, 47 to 63 Hz for the
90000A series)
Maximum power dissipation: 90000A series is 550 W
Figure 1-3
Infiniium Oscilloscope Power Cord Connection
1-12