To inspect package contents
❏ Inspect the shipping container for damage.
Keep a damaged shipping container or cushioning material until you have
inspected the contents of the shipment for completeness and have checked the
oscilloscope mechanically and electrically.
❏ Inspect the oscilloscope.
• If there is mechanical damage or a defect, or if the oscilloscope does not
operate properly or does not pass performance tests, notify your Agilent
Technologies Sales Office.
• If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier and your Agilent Technologies Sales Office. Keep
the shipping materials for the carrier's inspection. The Agilent Technologies
Sales Office will arrange for repair or replacement at Agilent's option without
waiting for claim settlement.
❏ Verify that you received the following items in the Infiniium Oscilloscope
packaging.
• Infiniium oscilloscope
• Mouse (USB optical)
• Touchscreen Stylus
• Calibration Cable (cable not available or required for the DSO90254A)
• SMA to Precision BNC Adaptors
• Accessory Pouch (detachable)
• Front panel cover
• Keyboard
• Power cord
• Probe de-skew and performance verification kit
• User's Quick Start Guide
See the following figures for your model of Infiniium Oscilloscope. If anything
is missing, contact your nearest Agilent Technologies Sales Office. If the
shipment was damaged, contact the carrier, then contact the nearest Agilent
Technologies Sales Office.
Setting Up the Oscilloscope
To inspect package contents
1-3