Table of Contents
Advertisement
To set dialog box preferences
• To allow multiple dialog boxes on the screen at a time, select Utilities,
then User Preferences. Then select Allow Multiple Active Dialogs in
the User Preferences dialog box.
Normally, the oscilloscope displays only one dialog box at a time, and you must
close that dialog box before opening another. With Allow Multiple Active
Dialogs, you can change several different aspects of the oscilloscope
configuration simultaneously.
Remove Clutter from the Waveform Display
Having too many dialog boxes on the screen can make it difficult to see the
waveform. Close dialog boxes you are not using to remove clutter from the
waveform display.
Figure 3-39
Setting Dialog Box Options
Select this command to
allow many dialog
boxes to be present on
the screen at one time
Using the Oscilloscope
To set dialog box preferences
3-57
Advertisement
Table of Contents
