Create A New Test - Omicron Lab SPECTANO 100 User Manual

10.2

Create a new test

When creating a new test, SPECTANO Analyzer Suite guides you through the
test workflow. This section describes step by step the test workflow.
To create a new test:
1. Start SPECTANO Analyzer Suite.
2. In the start view, click the New test button
Figure 10-2 Figure Figure 10-2
3. Read 3. Read and follow the instructions and recommendations displayed in the test
4. 4. In the Navigation pane, click General test settings, and then enter the
5. In the Navigation pane, click Test cell settings.
6. Under Test cell configuration, select the test cell type, and then enter the
7. In the Navigation pane, click Sweep settings, and then enter the settings
File tab selected on the ribbon. On the left of the test view, the Navigation
pane displays steps of the test workflow.
Note: The Navigation pane is displayed independently of the tab selected
on the ribbon.
Test view: File tab
vi view.
settings (see Table 10-9 "General test settings" on page 51).
test cell settings (see Table 10-10 "Test cell settings" on page 51).
(see Table 10-11 "Sweep settings" on page 52).
Note: The sweep settings depend on the measurement mode selected
under Measurement type.
SPECTANO Analyzer Suite
. The test view opens with the view opens with the opens with the
st view, the Navigation he Navigatio
pendently of the tab selected ndently of the tab select
h t
41