Connect Spectano 100 To The Dielectric Sample Holder Dsh 100 - Omicron Lab SPECTANO 100 Quick Start Manual

7.6 Connect SPECTANO 100 to the Dielectric Sample
Holder DSH 100
Connect SPECTANO 100 to OMICRON Lab's DSH 100 Dielectric Sample Holder by using the delivered
triaxial cables as shown in the following figure
To test the functionality of SPECTANO 100 without a sample cell, connect
SPECTANO 100 to the DTS1 dielectric test sample box by using the delivered
standard triaxial cables as shown in the following figure.
Figure 7-6 Connecting SPECTANO 100 to the DTS1 dielectric test sample
box for measuring on the Sample 1 connector
Figure 7-7 Connecting SPECTANO 100 to the DSH 100
1. For measuring on the Sample 2 connector, connect the blue-labeled cable to the Sample 2
connector.
Installation
1
29