GE Voluson E Series Service Manual page 268

Replacement Procedures
8. After clicking
The system saves Full Backup in silent mode on R:, then it reboots into LINUX.
9. Check disk is performed automatically - restart.
A silent "Rollback" image from C:\ is stored on R:\. After executing all LINUX commands, the system
reboots again.
10. 3 dots (one after the other) appear on the screen.
11. Booting auto ....
8-10
Install , the SW update procedure starts.
Figure 8-13 installation in progress
Figure 8-14 Check disk is performed automatically
Figure 8-15 Boot screen - auto
Voluson E-Series Service Manual
KTD106657 Revision 2