GE Voluson E Series Service Manual page 214

Components and Functions (Theory)
5.14 Service Page
5.14.1 Introduction
The Service Page contains specific software/hardware test modules, system setup,update, etc. for Voluson
E-Series systems only.
5.14.2 Access / Security
The service page has different access and security user levels. Each user is only granted access to the tools
that are authorized for their use.
5.14.3 Service Login
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the left side of the screen select
4. Enter the password <SHE> and click the
5-20 on page 5-42
1 Auto Tester
2 Update
3 TCP/IP Buffersize
4 Show Factory Presets
5.14.3.1 Auto Tester
Autotester is a log function of customer activities. It records all user actions (scanning, Touch Panel entries,
performing Calculations, review of Patient Reports, etc....). It is possible to safe (record) as file on HDD. But
also export to DVD/CD can be done to allow replay of the records on other units.
For intermittent problems this file can be requested from the Service Engineer or customer. It is possible to
Note
burn this file on DVD/CD+R/RW.
Operation see
5-42
System Setup button to invoke the setup desktop on the screen.
Administration and then click the Service tab.
).
5 Monitor Test
6 Common Service Desktop
7 Request for Service
8 Delete all Patients
Section 7.7 "How to use the Auto Tester program" on page 7-17
Accept button to display the Service Tools page (see
Figure 5-20 Service Tools page
9 Export System Data
10 Load Application Settings and
Factory Presets
11 Keyboard Layout
12 Exit
.
Voluson E-Series Service Manual
KTD106657 Revision 2
Figure