GE Voluson E Series Service Manual page 263

5. Select the
print out the options page or write down down the state of the options (P = permanent, I = inactive).
It is not necessary to note the Permanent Key; it is the state of the option that matters.
Note
1 D = Demo (Option is activated for demo and expires at date shown in the "Valid" column)
2 Permanent Key
If the currently installed software has to be upgraded to a newer version, and the system is updated via the
Note
FMI from DVD button, a new software specific "Permanent key" is required. Please contact your local
distributor or GE service representative.
Voluson E-Series Service Manual
KTD106657 Revision 2
Option tab to see which options (and Application Packages) are currently installed. Please
Figure 8-2 System Setup - Administration - Options page
I = Inactive (Option is not activated)
P = Permanent (Option is permanently activated, i.e.purchased)
d = deactivated (Option is inactive)
Replacement Procedures
8-5