Removing A Wlan Profile; Customizing An Existing Wlan Profile - GE Voluson E Series Service Manual

3.13.2.6 Removing a WLAN Profile

1. Press the Utilities key on the control console.
2. On the left side of the screen select
3. Click the
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Select the

3.13.2.7 Customizing an existing WLAN Profile

1. Press the Utilities key on the control console.
2. On the left side of the screen select
3. Click the
4. The Wireless Network Configuration tool with available Wireless Networks appear.
5. Select the
6. Customize the following information:
-
Network Name (SSID)
-
Check box "Connect even if Network is not Broadcasting its Name (SSID)"
-
Network Authentication (Open, Shared Key, WPA PSK or WPA2 PSK)
-
Data Encryption
-
Network Key
-
Key Index
7. After you have filled in all the required information, click
Voluson E-Series Service Manual
KTD106657 Revision 2
Connectivity and then click the Device Setup tab.
WLAN Configuration button; see
Security tab and then click Remove .
Connectivity and then click the Device Setup tab.
WLAN Configuration button; see
Security tab and then click Customize .
Figure 3-69 Security - Customize
Figure 3-65 on page 3-70
.
Figure 3-65 on page 3-70
.
OK .
Setup Instructions
3-73