Insite Exc Configuration - GE Voluson E Series Service Manual

3.13.4 InSite ExC Configuration

Prerequisites for InSite Setup
If not already available, collect the following information from the hospital network administrator:
1. Proxy Server, if necessary
__________ / __________ / __________ / __________ and Port ________
2. Proxy Authentication, if necessary
User ____________________________________ and Password
_________________________________________
Configuration Steps
1. Enter the Common Service Desktop (CSD).
There are different possibilities to access the Common Service Desktop and its available features; see
Note
Section 5.12.2 "Access / Security" on page 5-39
2. Select the
This example shows fictional numbers!
Note
3. Fill out at least all bold stated mandatory fields in the Agent Configuration section (B).
-
The
serial number without prefix letter; e.g. KE810026.
-
Select
-
Enter
4. Check settings in the Advanced Configuration section (C).
-
Enterprise Server - PRODUCT
-
Service Center - EURO
-
Log Level - WARN
Voluson E-Series Service Manual
KTD106657 Revision 2
Configuration page, then double-click InSite ExC Agent Configuration (A).
Figure 3-75 Common Service Desktop - Configuration
Device Name (pre-populated) and the CRM field have to be prefix KE6 or KE8 + systems
Continent and Country from the pull-down menu.
City , State , Postal Code and Institution where the system resides.
.
Setup Instructions
3-77