Using Cine - GE Voluson E Series Service Manual

Functional Checks
4.3.6.3 3D/4D Sub Menu
Step Task
Probe Orientation
1
Gray/Tint Maps
2
Render View Direction
3
4 3D/4D Info
5 3D Color Off
6 Gray 3D
7 Background
8 Balance
9 Power Tresh.
For further details refer to the Voluson E-Series Basic User Manual.
Note

4.3.7 Using Cine

4.3.7.1 Activating Cine
Press Freeze, then roll the Trackball to display the images of the stored sequence one by one.
4.3.7.2 Cine-Split Function (Multiple Format)
After Freeze of a sequence in 2D Mode, two or four different images of the sequence can be displayed
simultaneously in Dual respectively Quad display mode.
Move the Trackball to display the images of the stored sequence. Use the Format keys to change to the next
(part of) frozen 2D image sequence to play back the cine memory.
The Cine-Split function (multiple format) is also possible in 2D Auto Cine mode.
Note
4-20
Figure 4-18 3D/4D Sub Menu
Table 4-7 Sub Menus
Adjust and activate the display of direction markers at border of the image.
Depending on individual requirements a "harder" or "softer" image can be obtained.
To select the desired Render View Direction.
The green line symbolizes the direction of the view.
Note: The Render View Direction keys are not available in Static 3D Sectional Planes.
On/Off switch to show full or reduced Image Info parameter on screen.
On/Off switch to show an acquired 3D+CFM, 3D+PD or 3D+HD-Flow image with or
without the color information.
Adjusts the contrast and brightness of the rendered 3D image.
Adjusts the contrast of the screen background from dark to bright.
Note: This key is not available in Static 3D Sectional Planes mode.
Note: Only available if a 3D+CFM, a 3D+PD or a 3D+HD-Flow image is acquired.
This function eliminates low color noise of motion artifact signals in the sectional slices
as well as in the rendered 3D image.
Note: Only available if a 3D+CFM, a 3D+PD or a 3D+HD-Flow image is acquired.
Expected Results
Voluson E-Series Service Manual
KTD106657 Revision 2