GE Voluson E Series Service Manual page 100

Setup Instructions
3.6.6.5 UP-D23MD Printer - Settings
1. Call up the "Printer Preferences"; see
2. Select the
3. Select the
-
Color Balance: Cyan = 0, Magenta = 0, Yellow = 0
-
Gamma Select: Gamma 1
-
Color Correction: set Printer Hardware Color Correction
-
Lightness: Sharpness = 7 or 8, Dark = 0, Gamma = -12, Light = 8
-
4. Save the adjusted printer settings with
5. Assign the printer to the remote keys P1, P2, P3 and/or P4; see
Selection" on page 3-57
3-56
Paper page and set settings as shown in the left image at
Graphics page. From the "Color Adjust" pull-down menu select:
Figure 3-57 Graphics page (Color Balance + Gamma Select)
Figure 3-58 Graphic page (Color Correction / Lightness)
.
Section 3.6.6 "Adjustment of Printer Settings" on page 3-51
Apply and OK . Close window and exit System Setup.
Section 3.6.7 "Remote Control
Figure 3-54 on page 3-54 .
Voluson E-Series Service Manual
KTD106657 Revision 2
.