Load Small Backup (Scan Settings) - GE Voluson E Series Service Manual

4.4.2 Load Small Backup (Scan Settings)

The loading procedure overwrites existing image/scan settings on the local hard drive.
Make sure to insert the correct System DVD. Additionally you can load the image settings from "D:
\UserSettings\FactoryDefault\V830".
4.4.2.1 Preparations
1. Insert a DVD/CD+R/RW into the drive or connect an external USB device.
2. Press the Utilities key on the control console.
3. In the "Utilities" menu touch the
4. On the left side of the screen select
5. Click the
6. Choose the media (2) and click the
If it is desired to load settings from media Internal HDD, click on the Change folder button, browse for the
Note
folder on "D:\usersettings\FactoryDefault\V830" and then click the Load button.
Two settings are available which slightly differ:
-
General = for rest of the world
-
USA = for United States (e.g., image orientation UP/DOWN inverted at transvaginal probes)
7. Select the appropriate file and click
8. Select the desired loading procedure:
-
"Load "Complete Backup"" on page 4-32
-
"Load only parts of the "Complete Backup"" on page 4-33
Voluson E-Series Service Manual
KTD106657 Revision 2
System Setup button to invoke the setup desktop on the screen.
Backup and then click the System Configuration tab.
Load button (1) of the "Small Backup (Scan Settings)" group.
Load button (3).
OK .
Figure 4-23 Load window
Functional Checks
4-31