Cold Settings For Multistage Mode ("Lo 2-Stage" And "Lo 3-Stage") - Siemens LMV37.4 Series Basic Documentation

The warm settings for fuel-air ratio control of the LMV37.4 have now been configured.
27.11.12 Cold settings for multistage mode («Lo 2-stage» and «Lo 3-stage»)

220/267
Building Technologies
P
V h min s
Note
Refer to chapters Warm settings for «Lo 2-stage» and «Lo 3-stage»!
But with no flame, no actuator travel and no automatic operation after the settings
have been made.
If run is shown in the display, the following must be observed:
P
V h min s
Note!

You now have the option of pressing
the LMV37.4.
Basic documentation LMV37.4...
27 Parameter level
ESC
%
Identification of start for setting the curve.
%
ESC
to continue with the cold setting for
CC1P7546en
17.12.2018