Safety Notes On Use Of The Azl2 - Siemens LMV37.4 Series Basic Documentation

Building Technologies

21 Safety notes on use of the AZL2

Caution!
To prevent the risk of fire and explosions, damage to heating plant or damage
resulting from improper use of the products, ensure that the following safety
notes are observed:
The burner management system covered by the present Basic Documentation may
only be used as specified and only in connection with the appropriate burner and
heating plant.
The burner management system with its AZL2 and the associated heating control
system may only be installed and commissioned by authorized technical personnel.
The AZL2 may only be used in dry spaces. Do not use AZL2 outdoors and protect it
against excessive temperatures and frost, and liquids, such as water, oil, fuel oil, etc.
Follow exactly the procedures and setting notes given in this Basic Documentation.
Appropriately identified settings must only be made by authorized technical personnel.
If the AZL2 is dusty or dirty, clean it with a dry cloth.
Do not carry out any maintenance or repair work on the AZL2. Such work may only be
performed by authorized technical personnel.
If you have any questions in connection with the AZL2, please contact your heating
engineer or refer to one of the addresses given in this Basic Documentation.
Basic documentation LMV37.4...
21 Safety notes on use of the AZL2
159/267
CC1P7546en
17.12.2018