Info Level; Display Of Info Level - Siemens LMV37.4 Series Basic Documentation

25 Info level

25.1 Display of info level

/reset
1...3 s

Note
On the info level, you can press
Instead of pressing

Note
Press

P
174/267
Building Technologies
The info level displays information about the LMV37.4 and about operation in general.
, you can also press
or for >8 seconds to return to the normal display.
/reset
V h min s %
Parameter Parameter value
Figure 101: Info level
No. Parameter
Info level
167 Fuel volume resettable [m³, l, ft³, gal]
162 Operating hours resettable
164 Number of startups resettable
176 Switching back to pilot switching cycles
163 Operating hours when LMV37.4 is live
166 Total number of startups
113 Burner identification
107 Software version
108 Software variant
102 Identification date
103 Identification number
104 Preselected parameter set: Customer code
105 Preselected parameter set: Version
143 Reserved
End
Basic documentation LMV37.4...
25 Info level
Press until InFo appears.
/reset
When releasing
/reset
or to display the next or the previous parameter.
for <1 second.
/reset
Note!
No change of values on the info level!
. _ . _
If the display shows
value may consist of more than 5 digits.
The value is displayed by pressing
Press for >3 s or press
/reset
selection of the parameter number (parameter no. flashes).
, you are on the info level.
below the parameter value, the
for >1 s and <3 s.
/reset
ESC
to return to the
CC1P7546en
17.12.2018