Service Notes; Life Cycle; Disposal Notes - Siemens LMV37.4 Series Basic Documentation


Building Technologies

1.10 Service notes


If fuses are blown, the unit must be returned to Siemens (refer to chapter
Warning notes)

Error diagnostics can only be made via the LMV37.4 (BC interface)
Note!
Only authorized persons may replace the fuse (according to EN 298-1, chapter 9.2.r)

1.11 Life cycle

The burner management system has a designed lifetime* of 250,000 burner startup
cycles which, under normal operating conditions in heating mode, correspond to approx.
10 years of usage (starting from the production date given on the type field). This
lifetime is based on the endurance tests specified in standard EN 298.
A summary of the conditions has been published by the European
Manufacturers Association
The designed lifetime is based on use of the LMV37.4 according to the manufacturer's
Data sheet and Basic documentation. After reaching the designed lifetime in terms of
the number of burner startup cycles, or the respective time of usage, the LMV37.4 is to
be replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery

1.12 Disposal notes

The unit contains electrical and electronic components and must not be disposed of
together with household waste. Local and currently valid legislation must be observed.
Basic documentation LMV37.4...
1 Safety notes
(Afecor) (www.afecor.org).
Control
19/267
CC1P7546en
17.12.2018