Siemens LMV37.4 Series Basic Documentation page 227

Par. Parameter
no.
22 = Lo mod oil actuator only
23 = Ho mod separate circulation control
24 = Ho 2-stage separate circulation control
25 = Ho mod. without circulation control
26 = Ho 2-stage without circulation control
27 = Ho 3-stage without circulation control
28 = G mod mech air actuator only
29 = Gp2 mod mech air actuator only
204 Behavior if analog input is invalid (4...20 mA)
0 = deactivate default output low-fire / trim function
(with warning message)
1 = safety shutdown + startup prevention
2 = deactivate default output low-fire / trim function
(without warning message)
205 Function Load controller contacts staged
0 = standard
1 = stages interchanged
208 Program stop
0 = deactivated
1 = prepurge position (phase 24)
2 = ignition position (phase 36)
3 = interval 1 (phase 44)
4 = interval 2 (phase 52)
210 Alarm in the event of start prevention
0 = deactivated
1 = activated
211 Fan ramp up time
212 Maximum time down to low-fire
213 Waiting time home run
214 Maximum time start release
215 Repetition limit safety loop
1 = no repetition
2...15 = 1...14 number of repetitions
16 = constant repetition
Recharging time:
Every 24 hours
Building Technologies
Number of Type Edit
elements
1 Std_u8 edit
1 Std_u8 edit
1 Selection edit
1 Selection edit
1 Time edit
1 Time edit
1 Time edit
1 Time edit
1 Std_u8 edit
Basic documentation LMV37.4...
28 Parameter list LMV37.4
Value range Increment
Min. Max.
0 2 1
0 1 1
0 4 1
0 1 1
2 s 60 s 0,2 s
0,2 s 10 min 0,2 s
2 s 60 s 0,2 s
0,2 s 10 min 0,2 s
1 16 1
Default Password level
setting write read
1 HF HF
0 OEM OEM
0 HF (GA) HF (GA)
LMV37.400Ax: 0 HF HF
LMV37.420Ax: 1
2 s HF HF
45 s HF HF
2 s OEM OEM
LMV37.400Ax: 25 s OEM OEM
LMV37.420Ax: 35 s
LMV37.400Ax: 16 HF HF
LMV37.420Ax: 1
227/267
CC1P7546en
17.12.2018