27.3 Change of heating engineer's password
Note!
For the OEM to change the heating engineer
VSD
F
A
>1 s
/reset
/reset
Continue in the parameter
level to the next parameter
group 100:
Building Technologies
Basic documentation LMV37.4...
27 Parameter level
'
s password, c: requires entry of the OEM password!
Press button combination
000: Int.
Pressing the
button takes you to parameter
/reset
041 heating engineer's password.
Parameter 041: flashes.
Press
to go to level c: for password
/reset
changes.
Letter n: for new appears flashing.
Proceed as described in chapter Entry of
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
Letter r: for repeat appears flashing.
Proceed as described in chapter Entry of
password and repeat entry of the new password.
After entry of the last character, the password
must be confirmed by pressing
SEt confirms that the new password has been
saved.
Pressing the
button takes you to parameter
/reset
041 heating engineer's password.
End of the parameter level
–
End
to display
.
/reset
.
/reset
–
187/267
CC1P7546en
17.12.2018