Changing The Heating Engineer's Password - Siemens LME7 Series Basic Documentation

Note
For the OEM to change the heating engineer's password, c: requires entry of the OEM pass-
word!
P
P
/reset
P
/reset
P
/reset
P
P
Building Technologies
HVAC Products
19.8.2

Changing the heating engineer's password

V h min s %
V h min s %
V h min s %
V h min s %
V h min s %
V h min s %
Basic Documentation LME7...
19 Operation via the AZL2...
Parameter 041: flashes.
Press to go to level c: for password changes.
/reset
Letter c: for confirmation appears flashing.
Proceed as described in section Entering the password
and enter the former password.
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter n: for new appears flashing.
Proceed as described in section Entering the password
and enter the new password (4 characters).
After entry of the last character, the password must be
confirmed by pressing
/reset
Letter r: for repeat appears flashing.
Proceed as described in section Entering the password
and repeat entry of the new password.
After entry of the last character, the password must be
confirmed by pressing
/reset
SEt confirms that the new password has been saved.
Parameter 041: flashes again.
.
.
.
CC1P7105en
13.10.2009
88/164