Changing The Heating Engineer's Password - Siemens LME39 Series Basic Documentation


VSD
F A
>1 s
/reset
/reset
/reset
/reset
56/73
Building Technologies Division
19.2

Changing the heating engineer's password

Note!
For the OEM to change the heating engineer's password, c: requires entry of the
OEM password!
Basic Documentation LME39...
19 Parameter level
Press button combination
000: Int.
Pressing the button takes you to
/reset
parameter 041 heating engineer's password.
Parameter 041: flashes.
to go to level c: for password
Press
/reset
changes.
Letter c: for confirmation appears flashing.
Proceed as described in section Entering the
password and enter the former password.
After entry of the last character, the password
must be confirmed by pressing
Letter n: for new appears flashing.
Proceed as described in section Entering the
password and enter the new password (4
characters).
After entry of the last character, the password
must be confirmed by pressing
Letter r: for repeat appears flashing.
Proceed as described in section Entering the
password and repeat entry of the new
password.
After entry of the last character, the password
must be confirmed by pressing
SEt confirms that the new password has been
saved.
You will then be taken automatically to the
next menu display 000: Int.
VSD
to display
F A
.
/reset
.
/reset
.
/reset
CC1P7106en
08.12.2017