Certificates And Approvals; Foundation Fieldbus Device Certification; Registered Trademarks - Endress+Hauser Proline Prosonic Flow 93C Operating Instructions Manual

Proline Prosonic Flow 93C FOUNDATION Fieldbus
Endress+Hauser
2.2

Certificates and approvals

The devices are designed in accordance with good engineering practice to meet state-of-the-art
safety requirements, have been tested, and left the factory in a condition in which they are safe to
operate.
The devices comply with the applicable standards and regulations in accordance with EN 61010-1
"Safety requirements for electrical equipment for measurement, control and laboratory use" and
with the EMC requirements of IEC/EN 61326.
The measuring system described in these Operating Instructions thus complies with the statutory
requirements of the EC Directives. Endress+Hauser confirms successful testing of the device by
affixing to it the CE mark.
The measuring system complies with the EMC requirements of the "Australian Communications
and Media Authority (ACMA)".
2.3

FOUNDATION Fieldbus device certification

The flowmeter has passed all the test procedures implemented and has been certified and registered
by the Fieldbus FOUNDATION. The device thus meets all the requirements of the following
specifications:
• Certified to FOUNDATION fieldbus specification
• The flowmeter meets all the specifications of the FOUNDATION Fieldbus-H1.
• Interoperability Test Kit (ITK), revision 5.01: The device can also be operated in conjunction with
other-make certified devices.
• Physical Layer Conformance Test by Fieldbus Foundation
2.4

Registered trademarks

FOUNDATION™ Fieldbus
Registered trademark of the Fieldbus FOUNDATION, Austin, USA
HistoROM™, T-DAT™, FieldCare
Registered or registration-pending trademarks of Endress+Hauser Flowtec AG, Reinach, CH
® ® ®
, Fieldcheck , Applicator
Identification
11