Installation; Incoming Acceptance, Transport And Storage; Incoming Acceptance; Transport - Endress+Hauser Proline Prosonic Flow 93C Operating Instructions Manual

Ultrasonic flow measuring system, foundation fieldbus

Hide thumbs Also See for Proline Prosonic Flow 93C:

Table of Contents

Installation

3.1

3.1.1

On receipt of the goods, check the following points:

• Check the packaging and the contents for damage.

• Check the shipment, make sure nothing is missing and that the scope of supply matches your

order.

3.1.2

The devices must be transported in the container supplied when transporting them to the measuring

point.

Caution!

Flanged devices should never be lifted at the sensor nozzle for transportation purposes. To transport,

lift or insert the sensor into the pipe, only use the metal holders fitted on the flange.

3.1.3

Note the following points:

• Pack the measuring device in such a way as to protect it reliably against impact for storage (and

transportation). The original packaging provides optimum protection.

• The storage temperature corresponds to the ambient temperature range (Page 82) of the

transmitter, the sensors and the corresponding sensor cables.

• The measuring device must be protected against direct sunlight during storage in order to avoid

unacceptably high surface temperatures.

Proline Prosonic Flow 93C FOUNDATION Fieldbus

Endress+Hauser

Table of Contents

Do you have a question about the Proline Prosonic Flow 93C and is the answer not in the manual?