2 Identification
"
6
2
Identification
2.1
Device designation
2.1.1
Nameplate
On the nameplate, you can find the following technical information:
ENDRESS+HAUSER
LIQUIPHANT M
Order Code
FTL 5#–######A### #### mm
Fig. 1
Information on the nameplate of the Liquiphant M with electronic insert FEL 50 A (Example)
2.1.2
Product structure
See KA ... (Basic device), table "Supplementary documentation" page 39.
2.2
Delivery
Caution!
Always note the instructions in chapter "Incoming acceptance, transport and storage"
on page 8 concerning the unpacking, transport and storage of devices!
The delivery consists of:
• Installed device
• poss. accessories (see Chapter 8)
Supplementary device documentation:
• Operating Instructions KA ... (Basic device)
• Operating manual (this booklet)
• Approval documentation: as far as not given in the operating manual
2.3
Certificates and approvals
CE symbol, Declaration of conformity
The instrument has been designed and tested according to the state of the art and left
the factory in perfect functioning order. The device meets all the appropriate standards
and regulations according to EN 61010 "Safety regulations for electrical measurement,
control, and laboratory devices". Thus, the device meets the statutory requirements of
Liquiphant M/S (HT), FEL 50 A PROFIBUS PA
in
L
FTL 51
Endress+Hauser