Capturing Still Frames From The Background Input; Capturing Still Frames From A Pip Or Key - Barco PresentationPRO-II User Manual

6. Operations
p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó
Use the following steps to save a captured still into permanent memory.
1.
2.
System controls will be locked
for 2 to 3 minutes while saving.
Figure 6-2. Background Frame Save Warning
3.
PresentationPRO-II • User's Guide
Capture a still as outlined in the previous two sections.
~
"

Capturing Still Frames from the Background Input

~
"

Capturing Still Frames from a PIP or Key

Warning
Do not execute the next step during live production. All
controls will be locked during the "save" process. It is
recommended that you save stills during pre-production as a
"setup" procedure.
On the Frame Grab Menu , press { SAVE } to save the captured frame into the
selected permanent storage register ( FG_1 , FG_2 or FG_3 ). Once pressed, the
screen will display an important warning:
Save Now?
~
Press YES to save the frame. All front panel controls will be locked for
up to three minutes while the still frame is saved.
~
Press NO to cancel the procedure.
If required, press { DELETE } to delete the selected frame from permanent storage.
This button only appears when frames are stored in permanent memory.
Capturing Still Frames
" on page 117.
" on page 118.
119