Loading Presets - Intellijel Metropolix Manual

The first Stage button in ALT Mode is used to load presets. Pressing it opens the LOAD screen,
which contains two parameters:
Loading Presets
You can choose to load presets instantly, or you may delay (queue) their loading until either a reset
command is received on TRK 1, or until the requisite number of 'Queued Pulses' (
accumulated.
To Instantly Load a Preset:
1. Press the ALT button followed by the LOAD (Stage 1) button to access the LOAD screen.
2. Turn the encoder to select the PRESET BANK that contains the preset you wish to load.
Make sure the ACTION parameter is set to 'Load.' Pressing the encoder toggles between the
3.
'Load' and 'Queue' options.
4. Press the Stage button (1-8) that corresponds to the preset you wish to load.
The preset loads, resetting the sequence, and the screen flashes a message to confirm the
preset has loaded.
● PRESET BANK : Turn the encoder to select between 8 banks of presets.
Banks are indicated by color (Red, Orange, Yellow, Green, Cyan, Blue,
Magenta, Pink), and the eight stage buttons will glow with the color of
the selected bank. Each of the eight stage buttons represents a different
storage slot within the chosen bank.
● ACTION : Press the encoder to toggle between 'Load' and 'Queued
Load.' With 'Load' selected, pressing one of the bank's 8 stage buttons
causes the preset to load instantly. With 'Queued Load' selected, the
preset is loaded only when TRK 1 is reset by either: 1) pressing the
RESET button; 2) sending a trigger into the RESET jack (if configure as
a reset input); 3) sending a trigger into AUX X , Y or Z (if assigned to
'Reset' on TRK 1), or 4) waiting for the number of queued pulses to
accumulate (as set with the 'Queued Pulses' option in the
Banks are named by color. Selecting a bank causes all 8 Stage
buttons to light with the chosen color. Each of the 8 Stage buttons
corresponds to a Preset location in that bank. Brightly lit Stage
buttons contain presets. Dimly lit Stage buttons are empty. A flashing
Stage button indicates the most recently loaded preset (if you don't
switch banks).
Metropolix Manual
SETUP menu).
SETUP menu) has
91