Swing - Intellijel Metropolix Manual

SWING
There is a single parameters accessible by the button:
● SWING : Swing delays each odd numbered clock pulse by a percentage of the current clock
interval. With a value of 50%, no swing is applied (straight time). The more you increase the
swing percentage above 50% the more your music will have a 'swing' feel. Metropolix' supports
swing percentages from 50% to 78%.
In Use:
1. Press either the TRK 1 or TRK 2 button (corresponding to the track you wish to swing).
NOTE: Swing settings are not available for the MOD Lanes.
2. Press the SWING button to access the SWING screen, shown above.
Turn the encoder to set a SWING percentage between 50% (no swing) and 78%.
3.
SHORTCUT: Hold down the SWING button and press one of the eight stage buttons to set a
SWING value directly. Note that the default swing shortcuts conform to MPC 'standard' values,
with the addition of 78%. These values also match the preset swing choices in other Intellijel
products, such as Tête and Steppy .
4. To reset SWING back to its default value (50%), long-press the encoder.
This button opens the SWING screen, which (for the selected track), sets
the swing amount between successive clock pulses. Swing delays each
even numbered clock pulse by a percentage of the current clock interval.
With a value of 50%, no swing is applied (straight time). The more you
increase the swing percentage above 50% the more your music will have a
'swing' feel. Metropolix' supports swing percentages from 50% to 78%.
Metropolix Manual 63