Ratcheting with Gate Stretching = ON
If Gate Stretching is ON (set in the
ways, which you select using the Ratchets parameter in the TRACK MENU. There are three
options: Multiply; Pulse; and Gated — each of which is described below.
● MULTIPLY
When you assign 'x' number of ratchets to a stage, this option creates 'x' number of ratchets in
'y' pulse counts, where the value of 'y' is determined by the stage's PULSE COUNT switch plus
the DIV screen's PULSE DIV value (if the GATE TYPE = MULTI) .
This results in ratchet repeat rates that speed up or slow down depending on how long the
non-ratched gate would last. It can yield very interesting rhythmic variations but may not
sonically resemble "traditional" ratchets.
The following example shows the relationship between number of RATCHETS , GATE TYPE,
PULSE DIV , and a Stage's PULSE COUNT when Gate Stretching = ON and
Ratchets = Multiply in the
TRACK MENU
), then ratcheting works in one of three different
TRACK MENU
.
Metropolix Manual
78
Need help?
Do you have a question about the Metropolix and is the answer not in the manual?