Intellijel Metropolix Manual page 69

In Use:
1. Press either the TRK 1 or TRK 2 button (corresponding to the track whose gate length you wish
to edit).
NOTE: Gate length settings are not available for the MOD Lanes.
2. Press the (TRACK) GATE button.
Press the encoder to toggle between editing the GATE LENGTH and GATE SCALE parameters.
3.
With the GATE LENGTH parameter highlighted (
4.
the desired track gate (as a percentage of a pulse/ratchet length). When turned fully clockwise,
track gates are set to 'Hold.'
SHORTCUT: With the GATE LENGTH parameter active, hold down the (TRACK) GATE button
and press one of the eight stage buttons to set the GATE LENGTH value directly, with Stage
buttons 1-8 setting GATE LENGTH values of 1, 15, 30, 45, 60 75, 90, and 'hold', respectively.
5. With the GATE SCALE parameter highlighted (
desired gate scaling.
SHORTCUT: With the GATE SCALE parameter active, hold down the (TRACK) GATE button and
press one of the eight stage buttons to enter a GATE SCALE value directly, with Stage buttons
1-8 setting GATE SCALE times of 1, 15, 30, 45, 60, 75, 90, and 100%, respectively.
6. To reset all TRACK GATE parameters back to their default values, long-press the encoder.
indicator beside it), turn the encoder to set
indicator beside it), turn the encoder to set the
Metropolix Manual 68