Ratch - Intellijel Metropolix Manual

RATCH
Press EDIT + RATCH to access the per-stage RATCHET feature. To edit a Stage's RATCHET
count, press the Stage button corresponding to the Stage you wish to edit.
Each stage has a ratchet count from 1 to 8, and the interpretation of this count depends on whether
or not Gate Stretching (as set in the
In Use:
1. Press either the TRK 1 or TRK 2 button , depending on which track's ratchets you wish to edit.
2. Press the EDIT button, followed by the RATCH button.
The screen displays an overview of every stage's ratchet count, and the eight stage buttons are
used to select which stage you wish to edit.
3. Press the button corresponding to the stage you want to ratchet.
That stage's button will flash
screen, the downward pointing arrow also indicates the edited stage.
4. Turn the encoder to set the number of ratchets (1 - 8) that you want applied to that stage.
5. Repeat Steps 3-4 for any other stages to which you wish to assign ratchets.
As long as you remain on the RATCH edit screen, any of the eight stage buttons to which
you've assigned a ratchet (that is, a value greater than 1) will light
Track Menu ) is ON
cyan to indicate which stage number is being edited. On the
Metropolix Manual
or OFF , as discussed later in this section.
cyan .
76