Control Knob Destinations - Intellijel Metropolix Manual

Control Knob Destinations
The following describe each assignable CTRL knob destination:
None
Accum ±
Accum Invert ± Turning the knob clockwise from the noon position reverses the ACCUM
Clock Div In
Direction ±
Gate Length
Gate Scale
Octave ±
Pitch Offset ±
The current CTRL knob has no destination, and does not control
anything.
Turning the knob clockwise from the noon position turns ON accumulation
for any Stages to which a pitch ACCUM function is assigned. Turning the
knob counterclockwise from the noon position turns OFF accumulation for
any Stage to which a pitch ACCUM function is assigned. to accumulate
only when the gate is high at the time the accumulation is scheduled to
occur; and will not accumulate when the gate is low.
direction on every stage, such that any previous positive accumulations
start accumulating in the negative direction; while any previous negative
accumulations start accumulating in the positive direction. Turning the
knob counterclockwise from the noon position restores all stage ACCUM
directions to their normal (programmed) directions.
Turning the knob directly changes the DIV screen's CLOCK DIV value on
the destination track(s).
Turning the knob clockwise from the noon position causes the sequence
to play in the forward direction. Turning the knob counterclockwise from
the noon position causes the sequence to play in the reverse direction.
Turning the knob directly changes the TRACK GATE screen's
GATE LENGTH value. This is the default assignment for CTRL 1.
Turning the knob directly changes the TRACK GATE screen's
GATE SCALE value.
Turning the knob clockwise from the noon position increases the octave
of all stages on the destination track(s). Turning the knob
counterclockwise from the noon position decreases the octave.
Much like the Pitch Post option (described above), this option also
applies pitch shift after the quantizer, but unlike that option, the actual
amount of pitch shifting is not limited to chromatic note values. Turning
the knob clockwise from the noon position increases the pitch of all
stages on the destination track(s) after the quantization stage. Turning the
knob counterclockwise from the noon position decreases the
post-quantization pitch.
Metropolix Manual 118