Order - Intellijel Metropolix Manual

ORDER
There are two main parameters accessible by the button:
● PLAY ORDER : The upper parameter defines the order in which any enabled stages will play
back. Metropolix features many order choices, as discussed in
Turn the encoder to select a different playback order.
● DIRECTION : The lower parameter sets whether the chosen PLAY ORDER occurs in a forward or
reverse direction (toggled by pressing the encoder ). Specifically:
Forward : When the DIRECTION parameter is set to 'Forward,' the sequencer advances
through stages in the chosen order.
Reverse : When the DIRECTION parameter is set to 'Reverse,' the sequencer advances
through stages in the opposite order.
Patterns repeat and the sequencer resets when the sequence reaches the length defined by the
LEN (LENGTH) screen
● If the LEN screen's PULSES value is set to 'Auto', then the pattern repeats after playing through
the chosen number of STAGES .
● If the LEN screen's PULSES value is set to a number, then the pattern repeats after playing the
chosen number of PULSES .
This button opens the ORDER screen, which controls the order that stages
play back in the currently selected track.
. Specifically:
Metropolix Manual
Order Options , later.
54