Intellijel Metropolix Manual page 43

Tuner... With this function highlighted, click the encoder to activate TUNER MODE and
display the Tuner Screen. Tuner Mode sends a static, octave-selectable pitch
to the PITCH out jacks and a high (or pulsing) gate to the GATE out jacks,
making it easy to quickly tune the connected oscillators. The Tuner Screen
contains two parameters.
Tuner Pitches C-5 - C+5
Tuner Gates
High
Clock
Click the EXIT button to exit Tuner Mode.
Metropolix Manual
Rotating the encoder selects the octave to which
you'll tune the connected oscillator(s). By
default, TUNER MODE sends 0V
(corresponding to C0), but you can tune to a
higher or lower octave by setting this parameter
to ±C1, ±C2, ±C3, ±C4 or ±C5.
Pressing the encoder switches between two
output gate types.
Outputs a gate that is "High" for the entire time
you're in TUNER MODE (thus letting oscillators
drone steadily while you tune them),
Outputs a gate that pulses with the sequencer
clock, making it easier to tune percussive voices
or any oscillator that runs through a VCA with a
fast closing AD-type envelope. When set to
'Clock,' the sequencer must be running in order
to transmit a clocked gated.
42