Intellijel Metropolix Manual page 83

In Use:
1. Press either the TRK 1 or TRK 2 button , depending on which track's probability you wish to edit.
2. Press the EDIT button, followed by the PROB button.
The screen displays an overview of every stage's probability value, and the eight stage buttons
are used to select which stage you wish to edit.
3. Press the button corresponding to the stage to which you want to assign a probability.
That stage's button will flash
screen, the downward pointing arrow also indicates the edited stage.
Turn the encoder to set the desired PROBABILITY AMOUNT .
4.
5. Press the encoder to toggle between the probability choices (as described above).
6. Repeat Steps 3-5 for any other stages to which you wish to assign probabilities.
As long as you remain on the PROB edit screen, any of the eight stage buttons to which you've
assigned a probability amount (less than 100%) will light
Various shortcuts are also available:
● Hold the EDIT button and turn the encoder to change the PROBABILITY AMOUNT across all
stages simultaneously.
● Hold the EDIT button and press the encoder to set all stages to the same
PROBABILITY TARGET .
● Long-press the encoder to reset the current stage to its default PROBABILITY AMOUNT ('100%')
and PROBABILITY TARGET ('Stage').
● Hold the EDIT button and long-press the encoder to reset all stages to their default
PROBABILITY AMOUNTS ('100%') and PROBABILITY TARGETS ('Stage').
blue to indicate which stage number is being edited. On the
Metropolix Manual
blue .
82