Intellijel Metropolix Manual page 103

● MX ASSIGN : This parameter displays the Track number (or MOD Lane) that is the source of the
Gx/Qx outputs. It is set by 1) pressing the encoder to highlight the parameter (moving the
indicator beside the MX ASSIGN value), then 2) rotating the encoder to select the source, then 3)
pressing the encoder to apply your selection.
The parameter label and selection options change depending on the selection you made in the
MX EXPANDER parameter field. Specifically:
If MX EXPANDER = 'Transport' or 'Stage Gates,' then rotating the encoder (when the
MX ASSIGN parameter is active) selects which track is the Gx/Qx output source.
If MX EXPANDER = 'Mod Stg Gates', then rotating the encoder (when the MX ASSIGN
parameter is active) selects which of the 8 MOD Lanes is the Gx/Qx output source.
If MX EXPANDER = 'Mod Clocks', then MX ASSIGN value is fixed to '1-8', meaning clocks
from each of Metropolix' eight MOD Lanes will appear the eight Gx/Qx outputs (using
whatever CLOCK DIV settings were selected for each lane's DIV screen).
NOTE: If you assign the Trk Out Swap parameter to a
Lane , then any MX TRK Assignments will "swap" when a high gate initiates the Track Out Swap
feature.
CTRL knob
Metropolix Manual
or an AUX input or MOD
102