Lane Menu Options For The Mod Lanes - Intellijel Metropolix Manual

Rest Pitch Hold
Update
Global Reset On
Off
Init Trk Default --
Lane Menu Options for the MOD Lanes
The following options are available in the Lane Menu for the
FUNCTION CHOICES
Init Lane <n> Defaults
Init All Lane Defaults
When a stage is set to GATE TYPE = REST, the stage's pitch setting is
ignored, meaning the previous stage's pitch is held over into the rested
stage. So if you're using an envelope with a long decay/release, you
won't hear the pitch change as the sequence progresses to the rested
stage, and the previous stage's pitch will die out without changing —
exactly as you would expect a 'rest' to work.
When a stage is set to GATE TYPE = REST, the stage's pitch setting is
honoured. Since a rested stage does not generate a new gate, you will
only hear this effect if you're using an envelope in which the
decay/release time is long enough to extend into the rested stage. At this
point, you would hear the pitch change as the envelope continues to
decay. This can result in some interesting 'ghost' notes or (if using the
SLIDE options) a "slur", rather than a "rest."
Resets the track's sequence when a trigger arrives at the RESET jack
and/or when you press the RESET button.
Does not reset the track's sequence when a trigger arrives at the RESET
jack, nor when the RESET button is pressed (unless the TRACK # button
is held down).
With this function highlighted, click the encoder to reset all track settings
(along with a track's stage settings) back to their defaults.
DESCRIPTION
-- With this function highlighted, click the encoder to reset all modulation
stages on currently displayed MOD Lane (1 - 8).
-- With this function highlighted, click the encoder to reset all modulation
stages on all 8 MOD Lanes
Metropolix Manual
MOD Lanes :
30