Intellijel Metropolix Manual page 114

With the MOD PARAM field highlighted, turn the encoder to select the Metropolix parameter you
4.
wish to control with the currently indicated MOD Lane.
5. Press the encoder to confirm your choice.
The MOD Lane destination parameter is set, and your choice is indicated in the Action Display
at the bottom of the screen
6. Press the encoder to toggle highlighting to the MOD ASSIGN field, highlighting it.
7. Turn the encoder to select which Track ( 1 , 2 , or 1+2 ) you wish to control with the indicated
MOD Lane.
8. Press the encoder to confirm your choice.
The MOD Lane will now modulate the assigned parameter on the chosen track(s).
9. To reset a MOD Lane assignment back to its default value (i.e. NO assignment), long-press the
encoder.
Metropolix Manual 113