Lim (Accum Limits) - Intellijel Metropolix Manual

LIM (ACCUM LIMITS)
The seventh Stage button in ALT Mode is used to assign the selected track's cumulative
transposition limits. This screen limits the amount of total possible transposition for any stage to
which an ACCUM value is set (accessed by pressing EDIT + ACCUM ).
There is both an upper transposition limit and a lower limit:
UPPER LIMIT :
LOWER LIMIT :
In Use:
1. Press the button ( TRK 1 or TRK 2 ) corresponding to the track whose cumulative transposition
you wish to edit.
2. Press the ALT button followed by the LIM (Stage 7) button to open the Transpose Limits screen.
Press the encoder to toggle between editing the UPPER LIMIT and LOWER LIMIT parameters.
3.
With the UPPER LIMIT field highlighted, turn the encoder to set the maximum amount of upward
4.
transposition (in scale degrees).
With the LOWER LIMIT field highlighted, turn the encoder to set the maximum amount of
5.
downward transposition (in scale degrees).
6. To reset all LIM parameters back to their default values, long-press the encoder.
Sets how high (in scale degrees) any stage's cumulative transposition is
allowed to rise above the starting pitch. The range is from +0 to +28 scale
degrees (which, for most scales is 4 octaves).
Sets how low (in octaves) any stage's cumulative transposition is allowed to
fall below the starting pitch. The range is from -0 to -28 scale degrees (which,
for most scales, is 4 octaves).
Metropolix Manual 104